A combination of at least two computers with a single wireless network bridge in the first place, you need to install any computer with an adapter. Then run CAT5 cable to all of them are connected to a switch or hub. The selected computer is used with Bridging have two types of adapters used in his main advice: A LAN adapter that should already be inside, and a wireless network card that ishelp create a connection to the wireless access point (WAP).
After installation and connection of these network adapters that allows you to bypass the computer to open the Control Panel and then click Network Connections. Note that the wireless network bridge, a minimum of two connections are required for different jobs that are created. These processes would be the Internet Sharing (ICS) and Internet Firewall (ICF).
Xbox 360 Wireless Network Adapter
Once inside theNetwork Connections folder, you should have a ton of connections. Each link is essentially all network cards: one for the wireless card, while the other cable to the card. At the opening of the connection details of the wireless card and visit the exhibition. This should prove that it works perfectly. Now would be a good idea to check the Ethernet connection, this should work perfectly. Now you need only click on these twoConnections at the same time - this can be done by selecting any combination with Ctrl key - and then choose any connection with the right mouse button in order to bridge the connections submenu. After configuring the context of this bridge should open a window to see the network connection.
ICF and ICS
ICF and ICS may be necessary in some cases. Whatever the cause, you must first third of an adapter. So, if you do, have ICF or ICS, you have to go a local shopfor computer hardware in order to obtain a new card adapter. But even if you have three adapters, this task would not be easy. Production of a bridge in this manner allows you had before the current one to fill them.
You can always use the setup wizard when it comes to such tasks, but the general would be required. First you need to use its configuration wizard to make a bridge before you enable ICS or ICF. The wizard then searchesfor an online connection and tries to configure them. Finally, if you prefer, you can bridge multiple network adapters that are connected to the network.
Setting up a wireless network bridgexbox 360 wireless network adapter best buy
